filming process

Screen Shot 2017-04-24 at 15.14.24.pngScreen Shot 2017-04-24 at 15.14.45.png

using dragonframe:

  • relatively simple process, had most trouble with seeing when things were in focus –> solved this by zooming into screen and using focus cue cards on the set to ensure focus
  • kept aspect ratio at 2.39:1 cinemascope to create cinematic effect for animation

WhatsApp Image 2017-04-20 at 9.43.10 PM.jpeg

filming on set setup:

  • setting laptop on higher table allowed whole team to see filming process and identify any problems (hands in shot, blutack/tape sticking out, movement of props
  • ideally would have set placed on a higher table as the height was too low, had to stoop all the time to adjust and animate puppets
  • having large scale storyboard

WhatsApp Image 2017-04-20 at 9.53.26 PM.jpegWhatsApp Image 2017-04-20 at 9.53.28 PM.jpeg

  • animating process: tried to set up teams for rota filming but ended up more effective to just stay as a unit for longer periods of time without switching and setting up/packing up

WhatsApp Image 2017-04-28 at 5.29.12 PM.jpegWhatsApp Image 2017-04-21 at 3.17.44 PM.jpeg

  • whiteboard planning and writing lists/schedules really helped us to stay on task + communicate between groups in morning/afternoon when people weren’t around
  • clear filming list daily in chronological order so whoever was filming would know instantly what needed to be filmed

WhatsApp Image 2017-05-03 at 10.43.12 AM.jpeg

  • storyboard – was always being edited and re-edited, shots taken out and shots added to fit story chronology better
  • crossing off shots after they were filmed to keep on track of progress



puppet construction process


WhatsApp Image 2017-03-06 at 5.30.38 PM.jpegIMG_1152.JPG

  1. felting kit to add texture to body – was advised by virpi and ended up being a time-effective way to construct the puppets and create a to-scale realistic texture
  2. crafting the base structure of doobee out of blocks of wood, drilling in holes for K&S and twisted armature wire


3. attaching latex covered armature wire limbs to main wooden structure – if we could redo this process we would dye the latex first before dipping the wires as acrylic paint flaked off the latex afterward and did not look as effective

WhatsApp Image 2017-03-10 at 7.45.12 PM.jpegWhatsApp Image 2017-03-10 at 7.03.35 PM.jpeg

4. felting doobee – was a long process but worthwhile to get the ‘fuzzy’ effect that worked really well, would work for crower as well


IMG_1151.JPGWhatsApp Image 2017-03-04 at 12.15.27 PM.jpeg

  1. creating body out of wood, legs out of 3D printed elements – had ideas on making a joint to make legs moveable but found twisting armature wire worked better and was an easier, more feasible solution
  2. K&S used to insert joints into wooden body – created stable joint that didn’t move

WhatsApp Image 2017-03-07 at 10.22.51 AM.jpeg

3. painted parts ready for assembly

WhatsApp Image 2017-03-10 at 5.52.31 PM.jpegWhatsApp Image 2017-03-08 at 9.44.08 AM.jpeg

4. assembling parts together and texturing legs further with shades of paint to create rusted effect as plain black looked too flat, needed more personality and realism





march 9: lighting workshop/tutorial with Marc and Misha

WhatsApp Image 2017-03-17 at 1.23.08 PM (1).jpeg WhatsApp Image 2017-03-17 at 1.23.09 PM.jpeg WhatsApp Image 2017-03-17 at 1.23.08 PM.jpeg WhatsApp Image 2017-03-17 at 12.18.48 PM.jpeg

  • raised issue of lighting backdrop after discussion, has multiple layers and would cast shadow on back layers –> light with even light LED panel? light from above to cast more even light?
  • analysing script to see which main times of day/environments/moods needed helped to figure out lighting, mainly night vs day for both interior and exterior
  • experimenting with gels, creative lighting: creating idea of time of day with unconventional colours eg. suspense with green, warmth/danger with red

6th march: group tutorial

  • further research needed into genre, conventions, paying homage to sci fi genre
  • keeping good record of progress, taking photos of making process, documenting reflection and thinking
  • working towards filming – planning filming schedule, creating rota of groups of people at different times
  • issue with not finishing making sets in time: focus on finishing interior first, keep making exterior whilst shooting on interior first, plan shooting schedule around this.

construction of interior/exterior set

IMG_0910.JPG  IMG_1014.JPGIMG_1016.JPG  IMG_1017.JPG

  1. experimenting with hexagon construction out of foamboard vs toilet roll and modroc –>modrock added very important layer of strength to structure to keep its shape, prevent it from falling over
  2. creating small sections of hexagon wall –> good way to
  3. fitting smaller sections into larger one to create structure of wall

IMG_1140.JPG IMG_1079IMG_1077.JPGIMG_1139.JPG

4. modrocking together entire structure –> we were concerned it wouldn’t be strong enough for such a large structure but ended up being really tough, impressed with the strength and physical properties of modroc, will definitely consider for future projects

5. spray painting beehive wall structure –> were concerned about colour looking too sand-like, but turned into the perfect honeycomb colour when sprayed onto structure

6. texturing tree out of modroc and paint layers – using pictures of real tree bark was very helpful in achieving a realistic texture (‘trees aren’t brown’), took many more layers than we thought it would, was worth the effort to add different layers of dimensions and colours


7. coloured structure for wall, adding thin layer of PVA and tissue paper on the  back to create translucent wall – water coloured over with yellow, acted like a gel would and created yellow light that was perfect for backlighting our set.

IMG_1155.JPG  IMG_1312.JPG

8. making floorboards out of plywood sheets – had problems with keeping boards same texture and same even height as we used scraps  –> solved problem effectively with watercolour stain in shades of red and browns


9. final wooden floorboards effect – took some time and effort to make it look ‘realistic’, had to create gradient on each board and put filler in between but was worth it for the final effect, looked really effective on camera especially

IMG_1310.JPGWhatsApp Image 2017-03-10 at 2.54.47 PM.jpeg

10. assembling beehive made of modroc and tree onto exterior set: team would measure the different elements onto the set at regular points during making – this helped us to keep in scale and make sure nothing looked out of place in overall set


11. texturing exterior base with sawdust and paint – provided really convincing to-scale texture for soil, was experimentation on a whim as we did not want to use real soil and we had lots of sawdust leftover from previous making, turned out to be very successful


12: further texture on all elements with scale grass – adding textures of a garden exterior with moss covering to tie all elements together visually, make them look like they exist in the same space


13. testing out puppets in set during making – seeing the first visual of our vision come together was really satisfying, knowing efforts hadn’t gone to waste! was able to make adjustments on furniture placement to allow enough space for both characters to move comfortably


14. completed and dressed, lighted set – really pleased with final effect, captured the cluttered ‘lived in’ feeling we needed for Doobee’s home. only issue were curtains for the windows, fabric was very stiff and did not bend and looked out of scale. wetting with water and manually creasing them helped slightly, though would’ve been more effective with another softer fabric

Screen Shot 2017-04-26 at 13.01.49.png

Screen Shot 2017-04-26 at 13.02.03.png

15. completed exterior set with backdrop and lighted – very pleased with final effect, all elements blend together really well, though rectangular shape of base limited the angles we could shoot at as the edges of set would show up on camera, had to compensate by zooming in further and only shooting from specific wide angles

feb 19: initial mockups of sets and characters


exterior mockup on animation wooden blocks


interior mockup with initial furniture

  • group had a burst of inspiration during development, all were hitting a creative block whilst trying to reach unified concept for sets, tried creating a quick 3D mockup model together with newspaper to illustrate our combined ideas –> worked extremely well


design mockups for crowder and doobee, not to scale 

  • as set mockups worked so well, i created mockups of the characters to achieve same purpose of being able to decide on final designs by seeing them in 3D format
  • illustrated my ideas a lot more effectively –> next step is creating to-scale mockups so they can be seen inside the set and moved around

WhatsApp Image 2017-02-26 at 10.38.54 PM.jpeg

  • to scale mockup – was too small to fit into exterior set as scale reference used was only the interior –> scale for both sets needs to be considered for final characters measurements

feb 17th: further conceptual development



individual storyboarding of scene 2



combined storyboarding of everyone’s individual sketches

  • each storyboarding one scene from fleshed out story, worked quite well and was a collaborative process afterward as well
    • cut up scenes and rearranged to create better flow for story
  • i did not previously storyboard visually on such a large scale on a wall, finding it very effective and easy to understand, communicate ideas to each other



visual inspiration for doobee, starting to put inspiration and research onto wall, collating ideas


  • having things on wall is boosting team morale, seeing what we have done so far and seeing how ideas overlap/contrast
  • moving things around is very helpful for experimenting with different ideas, is a visual map of our creative thinking